Collecting Cluster Information

Collecting cluster information

First, ensure that the operator has started successfully and that the collectinfo controller is running. Below is the information of the operator, showing that the collectinfo controller is running. If the collectinfo controller does not exist, it means the current version of the operator does not support the collectinfo feature. Please upgrade the operator version.

kubectl get pod -n alluxio-operator
NAME                                             READY   STATUS    RESTARTS   AGE
alluxio-cluster-controller-8656d54bc-x6ms6       1/1     Running   0          19s
alluxio-collectinfo-controller-cc49c56b6-wlw8k   1/1     Running   0          19s
alluxio-csi-controller-84df9646fd-4d5b8          2/2     Running   0          19s
alluxio-csi-nodeplugin-fcp7b                     2/2     Running   0          19s
alluxio-csi-nodeplugin-t59ch                     2/2     Running   0          19s
alluxio-csi-nodeplugin-vbq2q                     2/2     Running   0          19s
alluxio-ufs-controller-57fbdf8d5c-2f79l          1/1     Running   0          19s

Ensure that the Alluxio cluster has started successfully. Assume the Alluxio cluster is in the default namespace. Below is the information of the Alluxio cluster, showing that all components of the Alluxio cluster are running.

kubectl get pod 
NAME                                          READY   STATUS    RESTARTS   AGE
alluxio-coordinator-0                         1/1     Running   0          2m17s
alluxio-etcd-0                                1/1     Running   0          2m17s
alluxio-etcd-1                                1/1     Running   0          2m17s
alluxio-etcd-2                                1/1     Running   0          2m17s
alluxio-monitor-grafana-9fd587b4f-mnczs       1/1     Running   0          2m17s
alluxio-monitor-prometheus-6b55c568b8-sfp96   1/1     Running   0          2m17s
alluxio-worker-779d87567f-95wls               1/1     Running   0          2m17s
alluxio-worker-779d87567f-sgh4b               1/1     Running   0          2m17s

Collecting Information

Create a simple YAML file to collect information using default values (for a complete configuration, refer to Detailed Configuration).

Assuming the Alluxio cluster is in the default namespace, create collectinfo.yaml with the following contents.

apiVersion: k8s-operator.alluxio.com/v1
kind: CollectInfo
metadata:
  name: example-collectinfo
spec:
  alluxio:
    namespace: "default"

Create the collectinfo to start collecting information.

kubectl apply -f collectinfo.yaml

You can check the progress of information collection by viewing the status of collectinfo. The following shows the collection of five types of information, all completed successfully.

kubectl get collectinfo
NAME                  COMPLETED   FAILED   STATE       AGE
example-collectinfo   5/5         0/5      Completed   6m16s

The collectinfo will create multiple jobs in the alluxio-operator namespace to collect information about the Alluxio cluster. By default, all information is collected, and you can see that there are five jobs running: config, hardware, license, logs, and metrics.

kubectl get job -n alluxio-operator
NAME                               COMPLETIONS   DURATION   AGE
example-collectinfo-config-job     1/1           4s         4m10s
example-collectinfo-hardware-job   1/1           5s         4m10s
example-collectinfo-license-job    1/1           10s        4m10s
example-collectinfo-logs-job       1/1           5s         4m10s
example-collectinfo-metrics-job    1/1           4s         4m10s

Collecting information failed

The following shows a failure in information collection, with four types of information failing to be collected.

kubectl get collectinfo
NAME                  COMPLETED   FAILED   STATE    AGE
example-collectinfo   1/5         4/5      Failed   52s

Check the job information of the collectinfo. You can see that only the hardware job of collectinfo succeeded, while the other jobs failed.

kubectl get job -n alluxio-operator
NAME                               COMPLETIONS   DURATION   AGE
example-collectinfo-config-job     0/1           4m18s      4m18s
example-collectinfo-hardware-job   1/1           5s         4m18s
example-collectinfo-license-job    0/1           4m18s      4m18s
example-collectinfo-logs-job       0/1           4m18s      4m18s
example-collectinfo-metrics-job    0/1           4m18s      4m18s

You can always download the collection results regardless of the success or failure of the collectinfo operation.

The results will contain an error.log if there are any failures for debugging.

Downloading Results

There are two ways to download the results of information: kubectl cp and kubectl port-forward.

Results contain the following types of information:

config: The configuration files in Alluxio’s conf/ directory, such as alluxio-site.properties and alluxio-env.sh.
hardware: CPU and memory details for each Kubernetes node. Hardware specifications for coordinator, worker, fuse and operator components.
license: The license information of the Alluxio cluster, including the type, productionId and licenseVersion. And vCPU, memory and storage are being used.
logs: Logs from coordinator, worker, fuse, etcd and operator components. Supports tailing logs to show a specified number of lines from the end.
metrics: Allows setting duration and step to define the time range and sampling interval for metrics (collects all metrics).

kubectl cp

Use kubectl cp to copy the collected information to your local machine.

# Set an environment variable to save the name of the collectinfo controller
COLLECTINFO_CONTROLLER_NAME=$(kubectl get pod -n alluxio-operator -l app.kubernetes.io/component=collectinfo-controller -o jsonpath="{.items[0].metadata.name}")
# The name of the collectinfo <COLLECTINFO_NAME> needs to be filled in
kubectl cp alluxio-operator/${COLLECTINFO_CONTROLLER_NAME}:/tmp/output/<COLLECTINFO_NAME> output -n alluxio-operator

kubectl port-forward

Use port-forward to map the port of the collectinfo controller to your local machine. Map the remote collectinfo controller’s port 80 to your local port 28080.

# Set an environment variable to save the name of the collectinfo controller
COLLECTINFO_CONTROLLER_NAME=$(kubectl get pod -n alluxio-operator -l app.kubernetes.io/component=collectinfo-controller -o jsonpath="{.items[0].metadata.name}")
kubectl port-forward -n alluxio-operator ${COLLECTINFO_CONTROLLER_NAME} 28080:80

Use curl to download the collected information.

curl -H "Collectinfo-Name: <COLLECTINFO_NAME>" http://127.0.0.1:28080/download -o output.tar

Extract the downloaded file.

tar -xvf output.tar

Detailed Configuration

apiVersion: k8s-operator.alluxio.com/v1
kind: CollectInfo
metadata:
  name: example-collectinfo
spec:
  alluxio:
    # The namespace where the Alluxio cluster is located
    namespace: "default"
  # Information collection types, including config, hardware, license, logs, metrics
  # If not specified or set to "all", all information is collected
  # To specify multiple types:
  # type:
  #   - config
  #   - hardware
  type:
    - all
  # The number of retries. If a collection job fails, it will retry the specified number of times
  backoffLimit: 2
  logs:
    # The number of logs to collect, e.g., 100 means collecting the latest 100 logs
    tail: 100
  # Metrics information: "duration" indicates the collection duration, and "step" indicates the collection interval
  # The example below means collecting all metrics from now to the past two hours, with a one-minute interval between metrics
  metrics:
    # The duration of metrics collection, e.g., 2h means collecting metrics from now to the past two hours
    duration: 2h
    # The interval of metrics collection, e.g., 1m means collecting metrics every minute
    step: 1m
  # The image used for executing the collection task, defaulting to the Alluxio operator's image
  # Can be left unspecified to use the default value
  image: "<ALLUXIO_OPERATOR_IMAGE>"
  imagePullPolicy: "Always"
  # Resource limits for collecting information
  resources:
    requests:
      memory: "512Mi"
      cpu: "250m"
    limits:
      memory: "1Gi"
      cpu: "500m"

Categories

Collecting Cluster Information